2-32
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Step 7
Screw a M8 x16 bolt in the top support bolt hole on each side the access point (see
Figure 2-22
). Do not
screw the bolt all the way in; leave approximately a 0.25 inch (0.635 cm) space.
Figure 2-22
Position of 1552C or 1552CU Access Point in Pole Mount Bracket
Step 8
Position the two bolts on the access point into the appropriate quick mount notches on each side of the
mounting bracket (see
Figure 2-22
). Ensure that the hinged door is facing out.
Step 9
Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
point.
Step 10
Ensure that the front of the access point is vertical, and tighten the four bolts to
13 to 15 ft lbs
(17.6 to 20.3 Nm).
Step 11
For the 1552CU access point, continue with
Installing Antennas, page 2-36
. For the 1552C access point,
continue with
Connecting a Cable POC Power to the Access Point, page 2-58
.
1
M8 x16 bolt (supplied with pole mount kit)
3
F-connector
2
M8 x16 bolt (supplied with pole mount kit)
1
2
3
33
1579
