Cisco Aironet 1240AG Series, Быстрый старт

Страница: 31 / 48

31
Quick Start Guide Cisco Aironet 1240AG Series Access Point
– Repeater—Specifies that the unit operates as a repeater access point
not connected to Ethernet LAN. In this mode, wireless clients
associate to the access point.
–
Root Bridge—Specifies that the unit operates as a root bridge and
connects directly to the main Ethernet LAN. In this mode, the unit
accepts associations from other Cisco Aironet non-root bridges and
wireless client devices.
–
Non-Root Bridge—Specifies that the unit operates as a nonroot
bridge and connects to a remote LAN. In this mode, the unit must
associate with a Cisco Aironet root bridge using the wireless
interface. The nonroot bridge can support wireless client devices.
– Workgroup Bridge—Specifies that the unit operates as a workgroup
bridge connected to a small wired Ethernet LAN network through
an Ethernet hub or switch. The workgroup bridge must associate to
a Cisco Aironet access point or bridge.
– Scanner—Specifies that the unit is configured by a Cisco WLSE
and operates as a scanner and reports network traffic to the Cisco
WLSE.
•
Optimize Radio Network For—Optimizes the access point radio
performance in the wireless network by adjusting data rates. This setting
must match the setting on the clients.
–
Throughput—Maximizes data volume handled by the access point
but might reduce its range.