background image

 F. 

Connect the power adapter to 

the Gateway’s power port and 

the electrical outlet.

Power on the computer that  

 G. 

you want to use to configure the 

Gateway. 

The Power, Wireless, and at least one of the numbered Ethernet (1, 2, 3, 

H. 

or 4) LEDs should light up. If not, make sure the Gateway is powered on 

and the cables are securely connected.

Connection is complete. Go to Step 2: Configuration.

Configuration

 2 

In step 2, configure the Gateway to access the Internet through your ADSL 

Internet Service Provider (ISP). Use the setup information provided by your 

ISP.

NOTE:

 You only need to configure the Gateway once.

 A. 

Open your web browser. Enter 

http://192.168.1.1

 in the web 

browser’s 

Address

 field. Press 

Enter

.

 B. 

On the login screen, enter 

admin

 in lowercase letters 

in both the 

User name 

and 

Password 

fields (

admin

 is 

the default user name and 

password). Click 

OK

 

 

The 

C. 

Basic Setup

 screen appears. Refer to the settings provided by your 

ISP. Select the Encapsulation method your ISP has specified.

For the Multiplexing setting, select 

D. 

LLC

 or 

VC

Conexão da alimentação

Access the Web-Based Utility

Login Screen

Содержание ADSL Gateway







Отзывы: