Cisco 910, Руководство по установке, Страница: 1 / 18

19
Cisco 910 Industrial Router Installation
Preparing for Installation
Cisco 910 Industrial Router Installation
This chapter describes how to install the Cisco 910 Industrial Router and includes the procedures for basic router
installation and optional installation steps. The procedures you follow depend on your network environment and
requirements. This chapter contains the following sections:

Preparing for Installation, page 19

Verifying Router Operation, page 25

Installing the router, page 28

Installing the Antenna, page 29

Installing and Removing the Sensor Card, page 32

Installing and Removing the SSD Storage Card, page 33

Additional Router Connections, page 34

Connecting the Router to the Power Supply, page 36
Preparing for Installation
This section provides information about these topics:

Safety Recommendations, page 19

Safety with Electricity, page 20

Preventing Electrostatic Discharge Damage, page 20

Safety Warnings, page 20

CE Marking, page 22

Intended Use of the Equipment, page 22

National Restrictions, page 22

Antennas, page 23

Operating Frequency, page 23

Site Requirements, page 23

Other Guidelines, page 24

Verifying Package Contents, page 24
Safety Recommendations
To ensure general safety, follow these guidelines:

Keep the chassis area clear and dust-free during and after installation.

Keep tools and chassis components away from walk areas.

Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves.