16
17
1.
For NBN connections, under
Interface and Connections
select
GigabitEthernet2.
Configuring NBN Connection Settings
Using a computer that’s connected to your Cisco 867VAE-W router, open your web browser and go to
http://10.10.10.1
You will be prompted for a user name and password, by default these are:
Username:
iinet
Password:
iinet
5.
Select
Authentication
and tick
PAP.
Enter the details below and click
OK to finish. You’ll find WiFi setup
advice on page 11.
Username:
Your full ADSL/Naked
username (include any
“@domain.com.au”)
Password:
Your ADSL/Naked
password (case sensitive)
4.
Select
Connection. Enable PPoE
should be ticked. Next to
Description
please enter
“iiNet”
and then change
VPI
to
“8”
and
VCI
to
“35”.