8
9
Wired
To Office switch
If you are using your Cisco 867VAE-W router in a
business or office where a Local Area Network
(LAN) is involved, you should connect your router
to a Link port on your switch. This will then allow all
connected computers to access internet services via
your Cisco 867VAE-W router.
Direct to Computer
Plug one end of the ethernet cable into one of the
LAN ports on your router, then plug the other end of
the cable into the network port on your computer.
On most computers, this port will be on the back
of the PC tower. On laptops, you’ll usually find the
network port on either side of the keyboard.
Once your Cisco 867VAE-W router is connected,
you’re ready to get online.
Wireless
If you don’t have any devices that you can plug an
ethernet cable into, don’t panic! You can still connect
to your router’s wireless network.
Your computer will be able to see SSID “iiNet867”
with no password required.
We strongly recommend adding a password to
your WiFi network by following the instructions
on page 11.
Connecting your Cisco 867VAE-W
Please follow these steps to connect your Cisco 867VAE-W router.
1.
Connect the power cable to the power adaptor and then connect to the 12V Power port.
2.
Plug your phone cable to the VDSL/ADSL port.
3.
Connect the router to your computer or network via one of the methods on the next page.
Hint:
It’s possible to
have both wired and
wireless connections to
your Cisco 867VAE-W
router operating
simultaneously.