4
Release Notes for the Cisco 831, 836 and 837 Routers and SOHO 91, 96 and 97 Routers
78-15225-03
Correction of the Switch
It appears on page 2-4, Chapter 2 Installation of the
Cisco 836 Router and SOHO 96 Router Hardware
Installation Guide
and page 22 of the
Regulatory Compliance and Safety Information for Cisco 800
Series and SOHO Series Routers
. The warning is not necessary because the ISDN cable does not connect
to the ISDN wall jack directly, instead, it connects to a NT1 box first, and the NT1 box to the ADSL
splitter. The ADSL splitter then connects to the ISDN wall jack through an unshielded Category 5 cable.
Therefore, no network hazardous voltages are present in the ISDN cable.
Correction of the Switch
The switch cover wording on the back panel of the Cisco 831, 836 and 837 routers, and the Cisco SOHO
91, 96 and 97 routers is not correct. The words “ON” and “OFF” shown on the switch cover should be
“1” and “0” as depicted in
Figure 1
,
Figure 2
, and
Figure 3
. “1” represents power on, while “0”
represents power off. The back panel of the Cisco 831, 836 and 837 routers is almost identical to the
back panel of the Cisco SOHO 91, 96 and 97 routers. The change on the switch cover will not affect any
functionality of the router.
Figure 1
Back Panel of the Cisco 837 Router
Figure 2
Back Panel of the Cisco 831 Router
82007
ETHERNET
4
3
2
1
Cisco 837
ADSL
+18 VDC
CONSOLE
1
3
5
2
4
6
7
8
82022
ETHERNET 10BASET COMPUTERS (E0)
4
3
2
1
Cisco 831
ETHERNET 10BASET
INTERNET (E1)
+18 VDC
CONSOLE
1
3
5
2
4
6
7
8
