manualshive.com logo in svg

Cisco 807, Руководство по установке оборудования, Страница: 34 / 44

Поделиться
Скачать
Cisco 807 Скачать руководство пользователя страница 34

32

      

  

3.

Align the mounting brackets over the mounting holes so that the larger holes on the brackets extend out over the 
router.

4.

Attach the brackets to the router with the 4 screws provided using a Phillips head driver. Torque to 13-15 in-lbs.

5.

Mount the router with the attached brackets to the wall using screws that are adequate for your mounting area.

6.

Route the cables so that they do not put a strain on the connectors or mounting hardware.

Installing a DIN Rail

The DIN Rail kit is ordered separately.

The DIN Rail can be installed in two different orientations, horizontally and vertically.

To attach the DIN rail bracket to the Cisco IR807, follow these steps. 

Mounting the DIN Rail Bracket on the Router

1.

First, attach the DIN rail bracket to the back of the router. The DIN rail bracket mounts in two different ways, 
depending on the orientation you wish to use. See 

Figure 3

 for vertical orientation, and 

Figure 4

 for horizontal 

orientation.

Figure 3

Attaching the DIN Rail Bracket for vertical mounting

Содержание 807













































Отзывы:

Нет отзывов