background image

C H A P T E R

7-1

Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0

OL-11560-01 Rev. B0

7

Viewing Model Information, Status, and 
Statistics on the Conference Station

This chapter describes how to use the following menus and screens on the Cisco Unified IP Conference 
Station 7937G to view conference station information such as model, device, and network information:

  •

Model Information screen—Displays hardware and software information about the conference 
station.

  •

Status menu—Provides access to screens that display network and call statistics and device 
information.

You can use the information on these screens to monitor the operation of a conference station and to 
assist with troubleshooting.

You can also obtain much of this information, and obtain other related information, remotely through the 
conference station’s web page. For more information, see 

Chapter 8, “Monitoring the Conference 

Station Remotely.”

For more information about troubleshooting the conference station, see 

Chapter 9, “Troubleshooting and 

Maintenance.”

Note

There are certain options on the Network Configuration menu, Device Configuration menu, and Security 
Configuration menu that are for display only. These options are described in the 

“Network Configuration 

Menu” section on page 4-5

, the 

“Device Configuration Menu” section on page 4-8

, and the

 

“Security Configuration Menu” section on page 4-12

.

This chapter includes these topics:

  •

Model Information Screen, page 7-1

  •

Status Menu, page 7-2

Model Information Screen

The Model Information screen displays this information:

  •

Model Number—Model number of the conference station.

  •

MAC Address—Media Access Control (MAC) address of the conference station.

  •

Software Version—Version of the firmware running on the conference station.

Содержание 7937G - Unified IP Conference Station VoIP Phone



























































































































Отзывы: