Cisco 7925G Series Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 111

background image

Cisco Unified Wireless IP Phone 7925G Series Deployment Guide

48

Cisco Discover Protocol (CDP) Enables or disables CDP.

Advertise G.722 Codec

G.722 capabilities can be configured on a phone by phone basis and optionally
override the system default.

Home Screen

By default the Cisco Unified Wireless IP Phone 7925G Series will show the
traditional screen with the four icons for directory, services, settings and line
access.

FIPS Mode

The Federal Information Process Standards (FIPS) mode can optionally be enabled.

Auto Line Select

When enabled, indicates that the phone will shift the call focus to incoming calls on
all lines. When disabled, the phone will only shift the focus to incoming calls on
the currently used line.

Bluetooth

Indicates whether the Bluetooth device on the phone is enabled or disabled.

File System Verification

This parameter indicates whether the phone will perform a file system integrity
check as part of the firmware upgrade process. Enable this option to troubleshoot
file system issues. This feature may impact phone performance if it is enabled.

Minimum Ring Volume

This parameter controls the minimum ring volume on the phone. This value is set
by the administrator, and can not be changed by an end user. The end user can
increase the ring volume, but may not decrease the ring volume below the level
defined. The minimum ring volume range is from 0 to 7, with 0 (silent) being the
default value.

Below shows the main phone screen (left) and line view (right) display options for the home screen.

Note:

If configuring the

“Admin Password”

in Cisco Unified Communications Manager versions 5.1, 6.0, 6.1, 7.0, 7.1, 8.0 or

later and web access is set to

“Full”

, then it is recommended to enable TFTP encryption via the device security profile.

As of the 1.3(3) release, if settings access is set to

“Disabled”

, then the current ring volume will be locked in and will no longer

be configurable.

To configure product specific configuration options for the Cisco Unified Wireless IP Phone 7925G Series with Cisco Unified
Communications Manager Express, create an ephone template with the necessary options.

«
...
46
47
48
49
50
...
»

Содержание 7925G Series
















































































































Отзывы:

Нет отзывов

Похожие инструкции для 7925G Series

Бренд: Xblue Networks Страницы: 98

Бренд: Docomo Страницы: 469

Smartphone E-11

Бренд: Etisalat Страницы: 75

Бренд: Verykool Страницы: 49

Бренд: Grandstream Networks Страницы: 62

Бренд: SoftBank Страницы: 386

Бренд: Blackberry Страницы: 17

Бренд: MicroNet Страницы: 86

Бренд: Salora Страницы: 29

3rd Generation Wi-Fi Phone

Бренд: EZLoop Страницы: 82

Бренд: Grandstream Networks Страницы: 19

Бренд: Samsung Страницы: 221

Бренд: Lava Страницы: 27

iGET GBL8800 Pro Thermo

Бренд: Blackview Страницы: 66

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды