Cisco Unified Wireless IP Phone 7925G Series Deployment Guide
47
Load Server
A load server can be specified in IP format (x.x.x.x) if wanting to use an alternate
TFTP server for phone firmware downloads.
Admin Password
The admin password is used for web access. With Cisco Unified Communications
Manager 5.0 or later the admin password must be managed in Communications
Manager Administrator page, where previous versions allow local management.
Special Numbers
Special numbers can be programmed to dial out regardless of keypad lock state (i.e.
911).
Application URL
The application URL can be configured, which will convert the application button
to a service URL button or as a speed dial.
The application URL can be configured to link to a Push To Talk server for quick
access.
(I.e. PTT server =
http://x.x.x.x:8085/PushToTalk/displayPhoneGroupsMenu.do?sep=#DEVICENAM
E#
)
To configure the application button as a speed dial, enter in the format as
“Dial:X”
(i.e. Dial:23675).
“Send” Key Action
“Send” key action determines whether the green dial button is to use onhook
dialing and serve as last number redial, where a list of previously dialed numbers
will be listed, or to use offhook dialing, which will play dial tone.
Phone Book Web Access
Phone book web access must be set to
“Allow Admin”
in order to access the phone
book via the web page.
Unlock-Settings Sequence
By default, **# must be entered to unlock a menu that contains configurable items,
which can optionally be disabled.
Application Button Activation
Timer
The activation timer and priority of the application button can also be specified.
This determines how long the button must be pressed and held to activate.
Application Button Priority
If the priority is low, then will only function when the keypad is unlocked and on
the home screen. Medium priority will allow the application button to function
when in any menu or XML screen and high priority will allow the application
button to function when in any state including keypad lock.
Out of Range Alert
An out of range alert can be configured to beep once or periodically to audibly
notify the user that they have traveled out of the coverage area.
Scan Mode
Scan mode allows for auto, continuous, and single AP options, where auto
primarily scans only when on call and single AP only at power on.
Restricted Data Rates
The restricted data rates feature utilizes the Traffic Stream Rate Set (TSRS)
information element from CCX v4, which can define a data range (upper and
lower) for the client to use (i.e. 12 - 24 Mbps). This can be beneficial for
environments that have legacy clients requiring lower data rates to be enabled on
the access point, but also preventing other clients from downshifting to lower rates,
which lowers overall throughput and capacity. When enabled the Cisco Unified
Wireless IP Phone 7925G Series will not transmit below 12 Mbps for 802.11a and
11 Mbps for 802.11b/g.
Power Off When Charging
Power off when charging feature will power off the phone when placed on AC
power.
