Cisco 6823, Руководство администратора

Страница: 59 / 194

Procedure
Step 1 Click Extensions .
Step 2
Click the link in the Extension Info column for the handset for a specific user.
The IPEI link shows the null IPEI number
FFFFFFFFFF
.
Step 3
In the Terminal page, set the
IPEI
field to the IPEI for the user's new handset.
Step 4 Set the AC field.
Step 5
(Optional) Configure the other fields, as described in Terminal Web Page Fields, on page 90 .
Step 6 Click
Save
.
Step 7 (Optional) Repeat steps 3 to 7 to set up more handsets.
What to do next
Start Handset Registration, on page 51 .
Start Handset Registration
After you have one or more handsets configured on the base station, you tell the base station to start the
registration process. The base station waits to receive registration messages from the handsets to complete
the communication loop.
You can register all the handsets at the same time or register them one by one.
Before you begin
Connect to the base station web page as described in Sign in to the Administration Web Page, on page 42 .
The base station needs to be connected to the network and the green LED lit.
• Single handset configured: The handset must be configured as described in Add Handsets to the Base
Station, on page 49
• Multiple handsets configured: The handsets must be assigned to users as described in Assign Handsets
to Users, on page 50
Procedure
Step 1 In the Extensions page, check the check boxes beside the new handsets to be registered.
Step 2 Click Register Terminal .
Step 3
Check the check boxes for the handsets in the Extension column.
Step 4 Click
Start SIP Registration(s)
.
Cisco IP DECT 6800 Series Administration Guide
51
Phone Administration
Start Handset Registration