Cisco 6260, Руководство по установке

Страница: 10 / 244

Figures
x
Cisco 6260 Hardware Installation Guide
OL-2365-02
Figure 3-6 Positioning the Power and Ground Terminals to Accept Wires
3-11
Figure 3-7 Insert Grounding Wire into Grounding Receptacle
3-12
Figure 3-8 Connecting Power to the Terminal Block
3-13
Figure 3-9 I/O Module Wire-Wrap Pins Close-up
3-14
Figure 3-10 E3 I/O Module BNC Connectors
3-16
Figure 3-11 E1 I/O Module BNC Connectors
3-17
Figure 3-12 E3 I/O Module BNC Connectors
3-18
Figure 3-13 E1 I/O Module RJ-48 Connectors
3-19
Figure 4-1 Mounting Options for Ear Brackets
4-4
Figure 4-2 Screw the Mounting Aids to the Rack
4-5
Figure 4-3 Mounting Aids Support the Chassis During Installation
4-6
Figure 4-4 System Ground Connection
4-8
Figure 4-5 Strip and Square Off Power and Ground Wires
4-10
Figure 4-6 Positioning the Power and Ground Terminals to Accept Wires
4-10
Figure 4-7 Insert Grounding Wire into Grounding Receptacle
4-11
Figure 4-8 Connecting Power to the Terminal Block
4-12
Figure 4-9 I/O Module Wire-Wrap Pins Close-up
4-13
Figure 4-10 E3 I/O Module BNC Connectors
4-15
Figure 4-11 E1 I/O Module BNC Connectors
4-16
Figure 4-12 E3 I/O Module BNC Connectors
4-17
Figure 4-13 E1 I/O Module RJ-48 Connectors
4-18
Figure 6-1 Removing the Bezel and Air Filters
6-3
Figure 6-2 Close-up View of Cisco 6260 Chassis with Fan Trays and Bezel
6-5
Figure 6-3 xTU-C Line Card Installation
6-8
Figure 6-4 Positioning the Locking Tab for the xTU-C Line Card Installation and Removal
6-8
Figure 6-5 NI-2 Card Installation
6-11
Figure 6-6 Positioning the Locking Tab for NI-2 Card Removal and Installation
6-11
Figure 6-7 I/O Interface Module Retaining Screws
6-20
Figure 6-8 PEM Installation
6-21
Figure C-1 xDSL Connector Pin Locations
C-1
Figure C-2 BNC Connectors on the E3 I/O Module
C-2
Figure C-3 RJ-48c Connectors on the E1 I/O Module
C-2
Figure C-4 I/O Module Wire-Wrap Pins Close-Up
C-3
Figure C-5 NI-2 Card Console and Auxiliary Connector
C-4
Figure C-6 NI-2 Card Management Ethernet Connector
C-5