C H A P T E R
2-1
Cisco Video Surveillance 6050 IP Camera Installation Guide
OL-31413-01
2
Camera Installation
This chapter provides information and instructions for installing the Cisco Video Surveillance 6050
IP Camera.
The IP camera requires a network cable and a connection to a standard 10/100BaseT router or switch.
To power the IP camera with Power over Ethernet (PoE), a switch must be 802.3af compliant.
This chapter includes the following topics:
•
Warnings Before Installation, page 2-1
•
Installing the IP Camera, page 2-2
Warnings Before Installation
•
Power off the IP camera if smoke or
unusual odors are detected.
Contact your Cisco representative if these
situations occur.
•
Keep the IP camera away from water. If the
IP camera becomes wet, power it off
immediately.
Contact your Cisco representative if this
situation occurs.
•
Refer to the data sheet for the operating
temperature.
•
Do not place the IP camera on unsteady
surfaces.
