Cisco 5915 Скачать руководство пользователя страница 13

Страница: 13 / 20

Cisco 5915 Embedded Services Router Hardware Technical Guide

OL-24796-01

Product Specifications

Operating temperature

•

The conduction-cooled router can withstand extended
temperature ranges of -40ºF to +185ºF (–40ºC to +85ºC).

Note

Temperatures are measured at card edge rail. Card edge rail
must be 85º Celsius or lower.

•

The air-cooled router can withstand extended temperature
ranges of -40ºF to +158ºF (–40ºC to +70ºC).

•

Temperature ranges for completed solutions depend on
hardware configuration variables, including enclosures and
third-party components.

Non-Operating Temperature

•

-40ºF to +185ºF (-40ºC to +85ºC) for both the air-cooled and
conduction cooled boards

Altitude (low-pressure
operation)

•

Up to 15,000 ft. (4500 m) for both the air-cooled and
conduction-cooled boards

EMI/EMC

•

Conforms to CISPR 22, FCC Part15B Class A limits

•

The system integrator is responsible for completing the
necessary Safety/EMC testing and labelling the final product
sold to the customer.

Hardware Specifications

Power requirements/profile

•

5 VDC from PCI connector (5V)
Max (theoretical)

: 4.26W

Typical (rail temperature @ 25C)

: 3.00W

Typical (rail temperature @ 85C):

3.10W

InRush:

1.25A

•

3.3 VDC from PCI connector (3.3V)
Max (theoretical):

5.93W

Typical (rail temperature @ 25C)

: 2.64W

Typical (rail temperature @ 85C):

3.06W

InRush:

1.32A

•

Total
Max (theoretical):

10.19W

Typical (rail temperature @ 25C)

: 5.64W

Typical (rail temperature @ 85C):

6.14W

Note

There are no voltage rail sequencing requirements. Power
supply voltage rails can power-up/power-down in any order.
Both the 3.3V and 5V rails are required for the Cisco 5915
ESR.

Table 7

Cisco 5915 ESR Product Specifications (continued)

Cisco 5915 ESR Feature

Feature Description

Содержание 5915





















Результаты поиска

Содержание 5915

Отзывы:

Похожие инструкции для 5915

Бренды по названию

Популярные бренды

Cisco 5915, Техническое руководство

Результаты поиска

Содержание 5915

Отзывы:

Похожие инструкции для 5915

Бренды по названию

Популярные бренды