Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Determining the MAC Address for a Cisco Unified IP Phone
2-12
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
Related Topics
•
Adding Phones with Cisco Unified Communications Manager
Administration, page 2-11
•
Adding Phones with BAT, page 2-12
Adding Phones with BAT
Cisco Unified Communications Manager Bulk Administration (BAT) is a
web-based application that enables you to perform bulk transactions, including
registering, multiple phones to the Cisco Unified Communications Manager
database.
Before you can use BAT to add phones, you must obtain the MAC address for each
phone.
For information about determining a MAC address, see the
“Determining the
MAC Address for a Cisco Unified IP Phone” section on page 2-12
.
For detailed instructions about using BAT, refer to
Cisco Unified Communications
Manager Administration Guide
and to
Cisco Unified Communications Manager
Bulk Administration Guide
.
Related Topics
•
Adding Phones with Auto-Registration, page 2-10
•
Adding Phones with Cisco Unified Communications Manager
Administration, page 2-11
Determining the MAC Address for a Cisco Unified IP
Phone
Several procedures described in this manual require you to determine the MAC
address of a Cisco Unified IP Phone. You can determine a phone’s MAC address
in these ways:
•
From the phone, press the
OK
button and select
Settings > Network
Configuration > Mac Address
to display the MAC Address field.
•
Look at the MAC label on the back of the phone.
Содержание 3911
Страница 4: ......
