Cisco 380 Series, Руководство по установке оборудования

Страница: 22 / 56

1-8
Cisco 380 and Cisco 680 Series Hardware Installation Guide
OL-29172-01
Chapter
1
Hard drive fault LED
6
Fan status LED
2
Hard drive activity LED
7
System status LED
3
Network link activity LED
8
Identification button/LED
(For more
information, see “Replacing Hard Drives”
section on page 3-3 .)
4
Power supply status LED
9
Power button/power status LED
5
Temperature status LED — —
Table 1-1 Front Panel LEDs, Definitions of States
LED Name State
Hard drive fault
•
Off—The hard drive is operating properly.
• Amber—This hard drive has failed.
•
Amber, blinking—The device is rebuilding.
Hard drive activity • Off—There is no hard drive in the hard drive sled (no access, no fault).
•
Green—The hard drive is ready.
•
Green, blinking—The hard drive is reading or writing data.
Network link activity •
Off—The Ethernet link is idle.
•
Green—One or more Ethernet ports are link-active, but there is no activity.
•
Green, blinking—One or more Ethernet ports are link-active, with activity.
Power supply status
•
Green—All power supplies are operating normally.
•
Amber, steady—One or more power supplies are in a degraded operational state.
•
Amber, blinking—One or more power supplies are in a critical fault state.
Temperature status
•
Green—The appliance is operating at normal temperature.
• Amber, steady—One or more temperature sensors have exceeded a warning
threshold.
•
Amber, blinking—One or more temperature sensors have exceeded a critical
threshold.
Fan status
•
Green—All fan modules are operating properly.
•
Amber, steady—One fan module has failed.
•
Amber, blinking—Critical fault, two or more fan modules have failed.