Cisco 380 Series, Руководство по установке оборудования

Страница: 37 / 56

3-3
Cisco 380 and Cisco 680 Series Hardware Installation Guide
OL-29172-01
Chapter
Note Once the change is committed, you can only control IPMI “chassis power” options. For example,
Other IPMI Options
Other IPMI client software for is available that can be used to remotely power down and reboot the
chassis.
•
Ipmitool is available for Unix-type hosts and uses the following command:
remotemachine$ ipmitool -I lanplus -H 1.1.1.2 -U admin -P password chassis power reset
•
Software available for Windows, such as Supermicro’s IPMI View for Windows.
Replacing Hard Drives
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Warning Class 1 laser product.
Statement 1008
Caution
When handling appliance components, wear an ESD strap to avoid damage.
Tip
You can press the Identification button on the front panel or rear panel to turn on a flashing Identification
LED on the front and rear panels of the appliance. This allows you to locate the specific appliance that
you are servicing when you go to the opposite side of the rack. See the
“Status LEDs and Buttons”
section on page 1-7 for locations of these LEDs. To use a serial number to locate a specific Cisco 380 or
Cisco 680 applicance, look at the label on the back of the unit.