manualshive.com logo in svg

Cisco 2000, Руководство пользователя

Поделиться
Скачать
Cisco 2000 Скачать руководство пользователя страница 10

 

 

I

NSTALLATION 

G

UIDE

 

with FCC radio emission limits. 

with FCC radio emission limits. 

Modifications:  Modifications to this device not approved by Cisco 
Systems could void the authority granted to the user by the FCC to 
operate the device. 

Modifications:  Modifications to this device not approved by Cisco 
Systems could void the authority granted to the user by the FCC to 
operate the device. 

Other Notice 

Other Notice 

Note to CATV Installer:  This reminder is provided to call to the 
CATV installer’s attention Section 820-40 of the NEC, which 
provides guidelines for proper grounding and, in particular, specifies 
that the cable ground shall be connected to the grounding system of 
the building, as close to the point of cable entry as practical. 

Note to CATV Installer:  This reminder is provided to call to the 
CATV installer’s attention Section 820-40 of the NEC, which 
provides guidelines for proper grounding and, in particular, specifies 
that the cable ground shall be connected to the grounding system of 
the building, as close to the point of cable entry as practical. 

 -6- 

 

Warning 

Installation of the equipment must comply with local and national 
electrical codes. 

 

Environmental  Product Disposal Information:

  Dispose of this product in 

accordance with local and national disposal 
regulations (if any), including those governing the 
recovery and recycling of waste electrical and 
electronic equipment (WEEE). 
 
Go to 

http://cisco-returns.com

 for instructions. 

 RoHS 

Compliant: 

 

Cisco Systems is committed to compliance with 

the European directive on the Restriction of the Use of Certain 
Hazardous Substances in Electrical and Electronic Equipment, 
Directive 2002/95/EC, the RoHS directive. 

 

From the 1st of July 2006, products that are supplied to the European 
Union will comply with the RoHS directive. Cisco Systems certifies 
that equipment shipped to the European Union conforms to the 
Directive with exceptions using the Category 3 exemption provided 
in the Annex of the 2002/95/EC directive.

 

Underwriters 
Laboratories 
Inc. 

The Cisco Digital Media Encoder 2000 device was found to comply 
with the UL’s requirements. 

 

Disclaimers 

 

Cisco Systems makes no representations or warranties with respect 
to the contents or use of this manual and specifically disclaims any 
express or implied warranties of merchantability or fitness for any 
particular purpose. Further, Cisco Systems reserves the right to 
revise this publication to make enhancements in the products 

 
 -6- 

Содержание 2000


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды