manualshive.com logo in svg

Cisco 1941-DC-A - MWR Mobile Wireless Edge Router, Руководство по установке оборудования

Поделиться
Скачать
Cisco 1941-DC-A - MWR Mobile Wireless Edge Router Скачать руководство пользователя страница 34

2-2

Cisco MWR 1941-DC-A Mobile Wireless Edge Router Hardware Installation Guide

OL-7872-04

Chapter 2      Preparing to Install the Router

    Safety Guidelines

Safety Guidelines

Before you begin the installation of the Cisco MWR 1941-DC-A router, review the safety guidelines in 
this chapter, the 

“Safety Precautions” section on page 1-12

, and the 

“Rack-Mounting Configuration 

Guidelines” section on page 3-3

 to avoid injuring yourself or damaging the equipment.

In addition, before replacing, configuring, or maintaining the Cisco MWR 1941-DC-A router, review the 
safety warnings listed in the document Cisco 

Regulatory Compliance and Safety Information for the 

Cisco MWR 1941-DC-A Mobile Wireless Edge Router

.

Safety with Equipment

The following guidelines will help ensure your safety and protect the equipment. This list is not all- 
inclusive of all potentially hazardous situations, so be 

alert

.

Warning

Read the installation instructions before connecting the system to the power source. 

Statement 1004

•

Always disconnect all power cords and interface cables before moving the system.

•

Never assume that power is disconnected from a circuit; 

always

 check.

•

Keep the chassis area clear and dust-free before and after installation.

•

Keep tools and assembly components away from walk areas where you or others could fall over 
them. 

•

Do not work alone if potentially hazardous conditions exist.

•

Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

•

Do not wear loose clothing that may get caught in the chassis.

•

Wear safety glasses when working under conditions that may be hazardous to your eyes. 

Safety with Electricity

Warning

Before performing any of the following procedures, ensure that power is removed from the DC circuit. 

Statement 1003

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be 
accessed only through the use of a special tool, lock and key, or other means of security. 

Statement 1017

Warning

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network 
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some 
LAN and WAN ports both use RJ-45 connectors. 

Statement 1021

Содержание 1941-DC-A - MWR Mobile Wireless Edge Router

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды