manualshive.com logo in svg

Cisco 1941-DC-A - MWR Mobile Wireless Edge Router, Руководство по установке оборудования

Поделиться
Скачать
Cisco 1941-DC-A - MWR Mobile Wireless Edge Router Скачать руководство пользователя страница 26

1-10

Cisco MWR 1941-DC-A Mobile Wireless Edge Router Hardware Installation Guide

OL-7872-04

Chapter 1      Product Overview

    Hardware Description

Figure 1-5

Cisco MWR 1941-DC-A Router Rear View

Advance Integration Module for ATM

The 2-port T1/E1-RAN Optimization (VWIC-T1/EI-RAN) interface card provides redundancy support 
where the incoming bit stream is forwarded to a built-in (fixed) high performance advanced integration 
module for ATM (AIM-ATM or AIM-ATM-8) daughter card located on the motherboard of the 
Cisco MWR 1941-DC-A router. 

The AIM for ATM cards perform framing and enhanced ATM segmentation and reassembly (SAR). This 
functionality includes normal SAR functions for ATM Adaptation Layer traffic as well as indications for 
resource management (RM) and operation and maintenance (OAM) cells. The AIM for ATM card then 
interrupts the CPU with reassembled ATM Adaptation Layer traffic packets for backhaul.

The AIM-ATM card supports up to four independent ATM links, or two Inverse Mutiplexing over 
ATM (IMA) groups. The AIM-ATM-8 card supports up to eight independent ATM links, or four IMA 
groups. 

To determine which AIM is installed in your Cisco MWR-1941-DC-A router, use the 

show diagnostics

 

command in privileged EXEC mode.

Fixed Interfaces

The Cisco MWR 1941-DC-A router has two fixed LAN ports for 10/100Base-T Ethernet attachment. 
The ports are fully compliant with the IEEE 802.3 and 802.3U standards. The ports integrate the MAC 
functions and a dual-speed media-dependent interface (MDI). Both ports can operate in half- or 
full-duplex mode and can run independently of one another. For each Fast Ethernet (FE) interface, there 
are two green LEDs, one for Link Integrity and one for Link Activity (for LED information, see 

Table 1-2 on page 1-9

).

Power

connector

Fan

Rack mount bracket

(both sides)

Grounding

nut/screw

65784

Содержание 1941-DC-A - MWR Mobile Wireless Edge Router

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды