Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
Modules Internal to the Cisco 1941 Router
22
Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
Figure 19
Inserting Screwdriver in to the CompactFlash Cover
Figure 20
Removing the CompactFlash Cover
Step 2
Press the ejector button next to the CompactFlash memory card. The ejector button moves outward so
that it projects from the panel.
Step 3
Press the ejector button again. (See
Figure 21
.) This ejects the CompactFlash memory card part-way out
of its slot.
Step 4
Pull the CompactFlash memory card out of its slot.
Step 5
Push the ejector button in until the button is flush with the bezel.
Caution
To prevent damage to the ejector mechanism, the ejector button must remain pressed all the way in (flush
against the bezel) when not being used to eject a CompactFlash memory card.
253092
CF 1
CF 0
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
253019
CF 1
CF 0
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
DO NO
T REMO
VE DURING
NETWORK OPERA
TION
