9
Cisco 1841 Integrated Services Router with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Router with AIM-VPN/EPII-Plus
OL-8719-01
Cisco 1841 and Cisco 2801 Routers
There are two USB ports but they are not supported currently. The ports will be supported in the future
for smartcard or token reader.
The module’s internal Flash does not store any IOS images. The CF card must be used to store the valid
IOS image. The CF card that stores the IOS image is considered an internal memory module. The reason
is the IOS image stored in the card cannot be modified or upgraded. The card itself must never be
removed from the drive. Tamper evident seal will be placed over the card in the drive.
Roles and Services
Authentication to the Cisco 1841 and Cisco 2801 is role-based. There are two main roles in the router
that operators can assume: the Crypto Officer role and the User role. The administrator of the router
assumes the Crypto Officer role in order to configure and maintain the router using Crypto Officer
services, while the Users exercise only the basic User services. The module supports RADIUS and
for authentication. A complete description of all the management and configuration
capabilities of the router can be found in the
Performing Basic System Management
manual and in the
online help for the router.
10/100 Ethernet LAN Ports
HWIC/WIC/VIC Ports
Console Port
Auxiliary Port
Data Output Interface
10/100 Ethernet LAN Ports
HWIC/WIC/VIC Ports
Power Switch
Console Port
Auxiliary Port
Control Input Interface
10/100 Ethernet LAN Port LEDs
AIM LEDs
PVDM LEDs
Inline Power LED
System Activity LED
System OK LED
Compact Flash LED
Console Port
Auxiliary Port
Status Output Interface
Power Plug
Power Interface
Table 7
Cisco 2801 FIPS 140-2 Logical Interfaces (Continued)
