5
Installing the High-Density Electrical Interface Assemblies on the Cisco ONS 15310-MA
78-17418-01
Related Documentation
Figure 4
EIA Jack Screw
Caution
Threading one jack screw completely before threading the other jack screw might result in connector
misalignment and damage to the EIA. Do not overtighten the jack screws.
Step 7
Install the remaining three 6-32 x 5/16-inch pan head screws onto the EIA and torque to 8 to 10 in-lbs.
Step 8
Repeat Steps
3
through
7
to install the other EIA, as necessary.
Related Documentation
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual
•
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly
What’s New in Cisco Product Documentation
, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the
What’s New in Cisco Product Documentation
as an RSS feed and set content to be
delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently
supports RSS Version 2.0.
This document is to be used in conjunction with the documents listed in the
“Related Documentation”
section.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks
can be found at
www.cisco.com/go/trademarks
. Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)
115260
Thumbscrew
Inner screw
Rotation indicator
