manualshive.com logo in svg

Cisco 1003, Руководство пользователя, Страница: 17 / 62

Поделиться
Скачать
Cisco 1003 Скачать руководство пользователя страница 17

 Cisco 1003 and Cisco 1004 User Guide 17

Installing Your Cisco 1003 or Cisco 1004 Router

Making Network Connections

You must provide interface cables to connect the router to the Ethernet and WAN lines.

Note

Refer to the section “Pinouts” for cable specifications.

Warning

Do not work on the system or connect or disconnect cables during periods of

lightning activity. (To see translated versions of this warning, refer to the section
“Translated Safety Warnings” at the end of this publication.)

To connect the cables to the router, perform the following steps:

Step 1

Connect an Ethernet cable (not provided) to the 10BaseT (Ethernet) port on the
router. You’ll need a straight-through Ethernet cable if you’re connecting to an
Ethernet concentrator (or hub). Or you’ll need a crossover Ethernet cable if you’re
connecting to a personal computer (PC) Ethernet network interface card (NIC).

H3596

12VDC

Ethernet cable

10BaseT port

Содержание 1003































































Отзывы:

Нет отзывов