Cisco MERAKI MX67, Руководство по установке

Страница: 13 / 14

◦ A list of certified carriers can be found in our MX67 and MX68 Overview and Specifications document
11. Please contact the Meraki Support team if the cellular connection is still not being recognized after following the
steps above
Additional Settings
Setting VLANs
If your WAN uplink is on a trunk port, choose VLAN tagging > Use VLAN tagging and enter the appropriate value for
VLAN ID for your network.
Setting up a Secondary WAN Interface on the MX68
MX68 devices come with two dedicated Internet ports, which are both configured on the Security Appliance >
Appliance Status > Local Status under the Uplink Configuration.
Setting up a Secondary WAN interface on the MX67
You can toggle the LAN2 port between LAN and Internet , through Local Status Page
Setting PPPoE
PPPoE authentication may be required if you are connecting MX device to a DSL circuit. You need to know your
authentication option and credentials (supplied by your ISP) in order to complete these steps.
• Choose Connection Type > PPPoE.
• Select your Authentication option.
• If you select Use authentication , enter appropriate values for Username and Password .
Web Proxy Settings
These settings take effect if the MX device has to fall back to using HTTP to contact the Cloud Controller. By default,
web proxy is disabled. To enable web proxy, do the following:
• Choose Web proxy > Yes .
• Enter values as appropriate for Hostname or IP and Port .
• If you require authentication, choose Authentication > Use authentication , and enter appropriate values for
Username and Password .
Please note that all these settings below are accessible only via the local management console.
To apply all configuration settings to the appliance, be sure to click Save Settings at the bottom of the page.
13