Cisco MERAKI MX67 Скачать руководство пользователя страница 11

Mounting Hardware

The supplied wall screws and anchors allow you to mount the appliance on a drywall surface, either vertically or
horizontally. The distance between the holes you drill should be 5-1/8 inches (13 cm).

• For mounting on drywall, use a ¼-in drill bit, then insert the plastic and screw assemblies.

• For mounting on wood or a similar surface, use only the screws.

• Allow the heads of the screws to stick out far enough to be inserted securely into the back of the appliance.

Connecting to WAN

All Meraki MX devices must have an IP address. This section describes how to configure your local area network before
you deploy it. A local management web service, running on the appliance, is accessed through a browser running on a
client PC. This web service is used for configuring and monitoring basic ISP/WAN connectivity.

Setting up a Static IP Address

Do the following to configure basic connectivity and other networking parameters:

1. Using a client machine such as a laptop, connect to one of the

LAN

ports of the MX.

2. Using a browser on the client machine, access the appliance's built-in web service by browsing to

http://setup.meraki.com

. (You do not have to be connected to the Internet to reach this address)

3. Click

Uplink configuration

under the

Local status

tab. The default credentials use the device serial number as

the username, with a blank password field.

4. Choose

Static

for the

IP Assignment option

.

5. Enter the IP address, subnet mask, default gateway IP and DNS server information.

Setting up a DHCP IP Address

By default all MX devices are configured to DHCP from upstream WAN / ISP servers. Simply plug the MX's WAN /
Internet port to your upstream circuit and wait a few minutes for the unit to negotiate a DHCP address.

To ensure that the client PC is redirected to the local web service in the following step, you must disable all
other network services (ex: wi-fi) on your client machine.

When the WAN connection is fully enabled, Internet LED 1 will turn green.

11

Содержание MX67















Отзывы: