manualshive.com logo in svg

Cisco MERAKI CW9166, Руководство по установке

Поделиться
Скачать
Cisco MERAKI CW9166 Скачать руководство пользователя страница 1

CW9166 Installation Guide

CW9166 Installation Guide

The Cisco Catalyst Wireless 9166 is a tri-band enterprise-class WiFi 6E cloud-managed access point supporting the 2.4
GHz, 5 GHz, and the newly opened unlicensed 6 GHz frequency bands. Designed for the ultra-high capacity and
highest density, these AP meet the needs of the most demanding and mission-critical environments. The access point
includes a fourth radio dedicated to optimizing the RF environment and securing the airwaves. The AP also has an
additional Bluetooth Low Energy (BLE) capable radio used for location and other IoT applications. In addition, the
CW9166 has a USB port.

About this Guide

This guide provides instructions on how to install and configure your CW9166 access points. This guide also provides
mounting instructions and limited troubleshooting procedures. For more wireless installation guides, refer to the

wireless

installation guides section

on our documentation website.

Product Overview

Physical Specifications

CW9166

Interfaces

• 1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)

• 1x DC power connector (5.5 mm x 2.5 mm, center positive)

Power

1

Содержание CW9166























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды