VCC-SXCXP3NIR
Rev.905-0133-00
©2018 CIS Corporation. All rights reserved.
18
Please refer to the chart below for the lighting pattern at Active setting.
Lighting Status
Camera Status
OFF
No PoCXP Supplied.
Green Slow Blinking [0.5Hz]
Connection completed between device and host.
Green
Lighting
Transmitting video data.
Orange Slow Blinking [1Hz]
Waiting for a trigger input.
Red Fast Blinking
System error occurred.
※
The camera might work fine even when the red light is blinking. Also, please be noted that the camera would
remain indicating error, once the camera recognized an error, such as when a trigger was input in the restricted
timing, or when ROI or sub-sampling function was activated while grabbing images. Please reboot the camera,
or execute Device Control
– SensorReset to revert the camera to normal lighting condition.
8.10
Camera Timing Output
The following signals can be output via 6pins circular connector on the camera rear according to the settings of
LineSource.
Digital IO Control
LineSelector
Line1
LineMode
Output
LineSource
OFF
ExposureActive
FrameActive
LineActive
TriggerPacketActive
・
LineSource
ExposureActive
：
This is to indicate the exposure period of the image sensor with Hi Active.
FrameActive
：
This is to indicate the frame effective period with Hi Active.
LineActive
：
This is to indicate the line effective period with Hi Active.
TriggerPacketActive
：
This is to decode and output the uplink trigger packet signals from the frame grabber
board.
8.11
DeviceUserID
DeviceControl
DeviceUserID
[User Defined]
A user-defined device name can be set in the camera with the maximum of sixteen characters letter string.
Execute “UserSetSave” to save the user-defined device name in EEPROM in the camera.
Execute “UserDefault” to restore to the factory settings.
※
Register area is 16 byte in total. Please input single-byte alphanumeric characters.
※
Register area is 16 byte in total. Please input single-byte alphanumeric characters.
