VCC-5CXP3R
Rev. 905-0052-00
©2016 CIS Corporation. All rights reserved.
8
7
Camera Operation Mode
7.1
Link Configuration
7.2 Pixel Format Settings
ImageFormatControl
PixelFormat
BayerRG8
BayerRG10
7.3 Camera Sync Mode
TriggerSelectorAndActivation
AquisitionMode
：
Internal Sync Mode (Free Run Mode)
FrameStartRisingEdge
：
External Trigger Sync Mode (Fixed Trigger Shutter Mode: Rising Edge)
FrameStartFallingEdge
：
External Trigger Sync Mode (Fixed Trigger Shutter Mode: Falling Edge)
FrameStartLevelHigh
：
External Trigger Sync Mode (Pulse Width Trigger Shutter Mode: High Active)
FrameStartLevelLow
：
External Trigger Sync Mode (Pulse Width Trigger Shutter Mode: Low Active)
FrameBurstStart
：
Internal Sync Mode (Burst Mode of Sequence function)
・
TriggerSource
To set the method for trigger input at External Trigger Sync Mode.
LinkTrigger0 : Utilize LOW SPEED uplink of CoaXPress, and input trigger from frame grabber via coaxical cable.
LinkIn : Input trigger from No.5 pin of circular connector at camera rear.
・
TriggerSoftware
This command generates trigger in the camera, and captures 1 frame. Please note that this trigger does not have the time
accuracy like the trigger generated by TriggerSource.
Only valid Acquisition Control mode is TriggerSelectorAndActivation --- FrameStartRisingEdge Mode
Transfer Control
CxpLinkConfiguration
CXP1_ X1
CXP2_ X1
CXP3_ X1
CXP5_ X1
CXP6_ X1
Acquisition Control
TriggerSelectorAndActivation
AquisitionMode
FrameStartRisingEdge
FrameStartFallingEdge
FrameStartLevelHigh
FrameStartLevelLow
FrameBurstStart
TriggerSource
LinkTrigger0
Line0
TriggerSoftware
(Execute)
Aegis Electronic Group, Inc.
