CIS CRS328-24P, Руководство пользователя

Страница: 22 / 26

22
PoE Information and Settings
PoE-Out Modes:
Auto-on mode (default)
When selected, auto-on mode checks for resistance on the host device and will automatically supply
power to devices that require it. It will not damage non-PoE devices.
Forced-on mode
When selected, the switch applies power on pins 4,5 (+) and 7,8 (-), even if no cable is attached.
Be careful plugging non-PoE devices into a port when Forced-on is selected. You may damage your
device!
Off mode
When selected, the switch will not supply power to connected devices.
PoE-Out limitations
The total PoE limit is 450w (150w per 8 port group). Each port can provide up to 30 W with high voltage
output, and 26.5 W with low voltage output.
Enable/Disable PoE
Select the port from the Interfaces tab. Change the PoE Out option accordingly.