CIS CIS-ACWAP, Руководство пользователя

Страница: 5 / 27

5
Device Details
CIS-ACWAP CIS-WAP
Ports
•
ETH1 – Gigabit Ethernet port. Accepts PoE power.
•
ETH2 – Gigabit Ethernet port. Connect other
devices to bridge them to the network.
•
DC jack – Use when PoE is not an option.
•
ETHERNET – 10/100 Ethernet port.
Accepts PoE power.
•
DC jack – use when PoE is not an
option.
LED Indicators
•
PWR – Lit when the device is powered on.
•
USR – An LED that can be customized by CIS.
•
ETHERNET – Green indicates network activity. An
amber light indicates the link is operating at 10/100
mbps.
•
PWR – Lit when the device is
powered on.
•
AP/CAP – Off when operating in
standalone mode. On when
controlled by the Wi-Fi manager.
•
2 GHz – Flashes when wireless
activity is detected.
•
ETH – flashes when activity is
detected on the ethernet port.
Buttons
Reset button: This button is located on the side next to the USB port. Hold this button while the device is
powered off, then apply power. Keeping holding until the USR LED light starts flashing, (5 seconds) then
release the button to reset to the default CIS configuration. You can use this procedure if you have
forgotten the password to access the device, or simply wish to return the unit to its default configuration
state.