CDB5480U
18
DS893DB5
2.4.2
CS5480 Serial Port Config Item
In the
Connect
menu, the
CS5480 Serial Port Config
item allows the user to select different types of serial
communication — UART or SPI. See Figure 14.
Figure 14. Connect Menu Showing Serial Connection Options
Before the software is configured, it is necessary to set J16 on the CDB5464U board to either UART or
SPI communication. To select UART communication install jumper J16 in the
SSEL to UART
position. To
select SPI communication install jumper J16 in the
SSEL to SPI
position.
To select UART communications, position jumper J16 to the
SSEL to UART
position and select
UART
in
the
Serial Port Selection
Figure 15. UART Serial Port Selection Window, UART Selected
Содержание CDB5480U
