CDB5480U
36
DS893DB5
2.8.2
Data Collection to File Window
The
Data Collection to File
window allows the user to collect instantaneous voltage and current register
data over an extended period of time to a data file. See Figure 30. The following steps are necessary for
data collection to a file:
1. Provide the
Time to Collect
in seconds.
2. If a delay before data collection is needed, enter the time in seconds for the
Delay
.
3. Select the voltage and current channel 1 (V1,I1) or voltage and current channel2 (V2,I2).
4. Browse to a directory and enter the file name of the desired file to save.
5. Start the data collection by pressing the
START
button.
6. The data collection status will be provided in
Samples Collected
and
Time Remaining
.
7. The collection will complete without any further interaction by the user or the user may stop the data collec-
tion at any time by pressing the
STOP
button.
Figure 30. Data Collection to File Window
Содержание CDB5480U
