CDB5480U
DS893DB5
27
2.7
Conversion
Window
The
Conversion
window allows the user to see the results of single and continuous conversions and the
CS5480 status, perform data averaging, and utilize the power-saving modes of the CS5480. The
Conversion
window can be accessed from the
System
menu pull-down,
Conversion
menu item. The
Conversion
window provides the active, apparent, and reactive energy calculations register results for
each channel. In addition, the RMS, power factor, and peak signal amplitudes for each analog-to-digital
converter channel, chip temperature (when temperature measurement function is enabled), AC line
frequency (converted from the
Epsilon
register), and the values of each status register (
Status0, 1, 2
) are
also displayed. The
Conversion
window also provides the total active, apparent, and reactive power
register results.
Figure 21.
Conversion
Window
2.7.1
Single Conversion Button
Pressing the
Single Conversion
button will cause a single conversion to be performed. After a single
conversion is complete, the
Result
column will be updated with the values present in each data register.
2.7.2
Continuous Conversion Button
Pressing this button will cause continuous conversions to be performed until the user presses the
Stop
button. After each conversion is complete, the
Result
column will be updated with the values present in
each data register. The
Mean
and
STD. DEV
columns will be updated every N cycle, where N is the
Содержание CDB5480U
