Cirris Signature 1000R+, Руководство пользователя, Страница: 6 / 88

1000R+ User’s Guide / page 7
Lets get started!
The Cirris 1000R+ cable analyzer is an easy-to-use machine that will allow you to test
cables quickly, and with little fuss. In simple terms, the process of using your 1000R+
goes like this:
1. Install any expansion boxes you want to use (see page 10 for details). Once you
have installed the boxes the first time, you probably won’t have to do this again.
2. Install connector adapters to match the cables you want to test (see page 9 for
details).
3. Check the test option settings; reset the options if you need to (see page 17 for
details).
4. Either:
• Learn a Sample Cable (a cable you know is built correctly) of the kind
you want to test (see page 23 for details), or...
• Retrieve the wirelist data for the kind of cable you want to test from the
analyzer’s memory (see page 29 for details).
This completes programming the analyzer for testing cables. If you have connected a
Sample Cable to learn it, disconnect it now.
5. Connect the first cable you want to test.
6. Test the cable (see page 27 for details).
7. Record and/or or print the test results (see page 28 for details).
That’s it! We’ll show you how to do each of these steps in this manual.
What your order
should contain
Your order should contain these things in addition to this manual:
• 1000R+ main unit, including a wall transformer with cord, to provide
power for the analyzer.
• Hand-held test probe.
• Whatever connector adapters you have ordered (usually shipped in a 3 x
5-inch card file). You may also have ordered an optional tilt stand, or an
optional frame stand. If so, these should be included.
• Any expansion boxes you have ordered.
Introduction
to the Cirris
1000R+