Cirris Signature 1000R+, Руководство пользователя, Страница: 23 / 88

Section 4: Learn a Sample Cable, Store it in Memory / Store the Sample Cable in memory
1000R+ User’s Guide / page 24
• If you don’t have a printer connected to the analyzer, pressing
Display/
Print
causes the analyzer to prompt wirelist information in its display.
Repeatedly press
Display/Print
to step through the wirelist, transcribing
the information to a blank documentation form (see page 79) as you go.
Compare the transcribed information to the Sample Cable’s specifica-
tion sheet or build list to be sure it’s a good cable.
3. Disconnect the Sample Cable from the analyzer.
Store the Sample
Cable in memory
Now that you’ve learned the Sample Cable, and verified that the wirelist data is
correct, you may store the cable in the analyzer’s memory. To store the cable, do these
things:
1. Press and hold in the
Memory
button (located on the back of the analyzer as
shown in this photo).
2. When you press the
Memory
button, the analyzer will prompt
Ready To Save
Learned Cable . Continue to hold the
Memory
button in for instructions 3 and
4.
3. While continuing to hold in the
Memory
button, press
Display/Print
to select a
memory location. The analyzer will default to the first unused memory location.
Each time you press
Display/Print
, the analyzer prompts the next unused mem-
ory location. For example, if location #1 is empty, the display will prompt Mem-
ory Location 1 Is Now Unused . Keep pressing
Display/Print
until you find
Press and hold
READY TO SAVE
LEARNED CABLE
Hold in the MEMORY button while you step by pressing here