Cirris CR Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 22

Cirris CR Скачать руководство пользователя страница 14

Cirris Systems | Checking the System 12

Note:

If you are updating an

existing installation, ensure that
your test programs are in the
test program list.

5.

Check to see if the color of the status
indicator is green or red.

If the status indicator says Ready,

the tester is working. Skip to
“Checking the Sound” on page 13.

If the status indicator says Error,

there is a problem with the tester.
See the “Troubleshooting a Red
Status Indicator” section below.

For any other unresolved problems, see

“Startup and Verify” in the easy-wire help system, or call Cirris

Technical Support at 1-800-441-9910.

Troubleshooting a Red Status Indicator

If you have a red status indicator on the main menu of the software, do the following:

1.

Verify that the USB cable is
connected between the computer and
the Base Scanner.

2.

Verify that there is power to the Base
Scanner and any Booster Scanners.

3.

Reboot the tester. If the problem
persists, write down the error
messages that appear after launching
the software, and call Cirris for
assistance.

Power Cord

USB Cable

«
...
12
13
14
15
16
...
»

Содержание CR























Отзывы:

Нет отзывов