Cirris CR, Руководство пользователя, Страница: 10 / 22

Cirris Systems | Setting up the CR Tester 8
3.
Connect the IEC power cord to the power supply.
4.
Plug the free end of the IEC power cord into the
same grounded outlet or plug strip that is used for
the computer.
5.
If you plan to use either the probe or wrist strap,
connect it to the back of the tester.
6.
If this is a single scanner system, connect
the terminators to the unused scanner ports.
Then proceed t
o “Checking the System” on
page 11.
If this is a multi-scanner system, see the
following section.
Then proceed to “Checking
the System” on page 11.
Installing Add-on Scanners
Consider the information below before installing your add-on scanner(s).
To computer
To Base Scanner
Terminators
To grounded
wall outlet