Installation Procedure
1000HX
Alarm Box Add-On Tech. Note page 7
8.
Unlock the quarter-turn fasteners on the alarm box, and lift the top assembly
out of the chassis. Lay the assembly carefully on its top as shown. Note the
long ribbon cable coming from the upper assembly in the Alarm box.
9.
Pop out the plastic covers from the rectangular openings in the sides of both
boxes (if they’re there), snake the long ribbon cable through the rectangular
openings in the sides of both chassis, then butt the two chassis together (the
pins on the side of the Alarm Box should fit into the holes in the side of the ana-
lyzer) and engage the drawlatches to lock the boxes together. Replace the top
assembly on the alarm box. Note that the long ribbon cable should snake across
the entire bottom of the analyzer’s chassis box.
Long Ribbon Cable
These openings
may have plastic
covers in them
Speaker Wires
(disconnected)
Long Ribbon Cable
