1000HX
Alarm Box Add-On Tech. Note page 3
What are we going to do
here?
In this section, we’ll give you a step-by-step procedure for installing the Alarm Box
Add-On accessory on your Cirris 1000H
X
. To make things easier, we’ll provide
digital photographs taken at the workbench, as one of our factory technicians
installed an alarm box.
Procedure
To install the Alarm Box Add-On accessory, follow these steps:
1.
Open the quarter-turn fasteners, and remove the scanner cover plate, then
gently lift the scanner assembly out of the chassis of the .
In this view, the quarter-turn fasteners which hold the scanner assembly
Scanner assembly
Ribbon Cable
(still connected)
Center Cover
Plate (still attached)
on the analyzer have been opened, and the cover plate has been
removed. The scanner assembly has been lifted from the chassis. Note
that the ribbon cable which connects the scanner with the rest of the
analyzer is still connected. The center cover plate is still in place on
the analyzer’s chassis.
Installation
Procedure
