Ciro Mazzoni LOOP ANTENNA MIDI, Инструкция по эксплуатации

Страница: 10 / 41

56
Tighten the two flanges, using the
stainless steel bolts and self-locking
nut.
The same operation is required to assemble the other semi-loop. Before joining
the second semi-loop, it’s necessary to feed the actuator power line through the
two aluminum tubes and flanges. This can be done by hooking the power line to
the string already inside the tube.
57
Pull the full length of the power
cable through the tubes, then
push it through the hole in the
base, into the distribution box.
The box in the picture hosts the
cable terminal strip and the RF
filter.
After spreading the anti-oxide paste in the grooved
flanges, unite the flanges and install the bolts and nuts.