Circutor WIBEEE Series, Инструкция по эксплуатации

Страница: 20 / 50

20
Wibeee
Instruction Manual
Table 10: Description of the LEDs�
LED Description
Red Blinking light:
Powered device.
Blue
Indicates the connection status:
Slow blinking light (1s): Generating a Wi-Fi network.
Fast blinking light (<1s) : Connected to a Wi-Fi network.
Steady light: Data being sent over the network.
4.4.- BUTTON
The device has a Reset button,
Figure 16
, to restore the device's factory settings (hold it down
for more than 6 seconds).
Reset
Reset
L2 L3
Reset
Figure 16:Reset Button�
4.5.-START-UP
During the start-up of the device, the Wibeee goes through different states:
1�- Configuration state
Blue LED → Slow blinking light (1s)
Red LED → Slow blinking light (1s)
In this state, the Wibeee generates its own Wi-Fi network called WIBEEE_xx:xx:xx�
It is only used to configure the device and connect it to the user's network.
If you want to return to this state to obtain the initial conditions, you should hold down the Re-
set button for more than 6 seconds. The device deletes any previous settings and restores the
default values.
2�- Connecting��� state
Blue LED → Off
Red LED → Slow blinking light (1s)
In this state, the Wibeee is managing the connection with the router/access point.
This state should last for 40 seconds, when there is good Wi-Fi coverage. In places where there
is weak Wi-Fi coverage, it may take longer.