Circutor RGU-100B, Инструкция по эксплуатации

Страница: 18 / 54

18
RGU-100B
Instruction Manual
4�2�- DISPLAY
The device has a backlit LCD display that is split into two areas (
Figure 15
):
Data area
Unit and status areas
Figure 15: RGU-100B display areas�

The data area , which displays all the values measured by the device.

The unit and device status area, which displays the different statuses, units and device in-
formation (
Table 8
).
Table 8: Display icons�
Icon Description Icon Description
Alternating current Prealarm activated
Direct current The device clock has not been set up
Channel:
CH1
channel 1 A trip has been generated
Programming screen
Programming menu:
Locked with a password.
Unlocked.
Internal device error, contact SAT
The device's display can change color, indicating:
Yellow color:
The installation has changed, see "5.2.- PROBLEMS OR CHANGES
IN THE INSTALLATION".
Red color:
The relay has tripped due to leakage current, see "5.4.- TRIP DIS-
PLAY SCREENS".
An Individual test has been carried out, see
“5.5.- TEST SCREEN”.
An error was detected in the
WGB�