Circutor RGU-10 MT, Инструкция по эксплуатации

Страница: 30 / 42

30
RGU-10 MT
Instruction Manual
device exits the programming menu, and shows a screen with the
“SAVE”
message.
6�2�5�- STATUS OF THE CONTACTORS ON THE COIL
The display shows SEC�T . To change the value, press the PROG key.
To modify the status of the contactors on the coil, press the td key repeatedly.
Programming values: St (
standard
)
or
PS
(positive signal)
�
When the desired value is shown on the screen, validate the number by pressing the
PROG
key. The
device exits the programming menu, and shows a screen with the “SAVE” message.