Circutor ReadWatt, Инструкция по эксплуатации

Страница: 8 / 24

3�2�- INSTALLATION
The device is installed on the energy meter.
The first step for installing
ReadWatt
is to separate the two parts of the Velcro strap. Take one of them,
remove the protective paper and stick the adhesive part of the Velcro strap to the rear of the device (
Figure 1
).
Figure 1: Stick part of the Velcro strap to the rear of the READWATT�
Remove the protective paper from the other part of the Velcro strap and stick the adhesive part to the
optical port of the billing meter (
Figure 2
).
Figure 2: Stick a part of the Velcro strap to the optical port of the meter�
8
ReadWatt
Instruction Manual