background image

line-EDS 

line-M 

line-M 

line-CVM 

line-M 

line-M 

line-CVM 

line-CVM 

Figure 5: Typical installation of a line-EDS-Cloud with 7 devices�

Note:

 

An installation may only be fitted with one

 

line-EDS-Cloud 

device

.

Note:

 

In installations without

 

line-EDS-Cloud  

devices

only one

 line-CVM 

device may ne installed.

Note: 

All

 

line-EDS-Cloud 

and

 line-CVM 

devices

 must be connected to the auxiliary power supply.

3�5�1�- Line-M-EXT-PS POWER ADAPTER

Line-M-EXT-PS

 is a power adapter belonging to the line family of devices. The module connects to the 

left-hand side of the devices to be fed. It can supply up to 10 VA, allowing it to power a limited number 

of devices.

The maximum set it can supply is: 1 

line-EDS-Cloud

 + 1 

line-CVM

 + 1 

line-M

 (

Figure 6

). 

line-EDS 

line-M 

line-M-EXT-PS 

line-CVM 

Figure 6: Maximum set a line-M-EXT-PS can supply�

Multiple 

line-M-EXT-PS 

devices can be connected to supply sets with power above 10VA. Each 

line-

M-EXT-PS

 will power the devices connected to its right-hand side (

Figure 7

).

line-EDS 

line-M 

line-M 

line-CVM 

line-M 

line-M 

line-CVM 

line-CVM 

line-M-EXT-PS 

line-M-EXT-PS 

line-M-EXT-PS 

Figure 7: Multiple line-M-EXT-PS connection�

Note: 

None

 

of the

 line-EDS-Cloud 

or

 line-CVM 

devices should

 

be connected to the auxiliary power 

supply.

10

line-EDS-Cloud

Instruction Manual

Содержание line-EDS-Cloud

































































Отзывы: