Circutor DHC-96 Aac, Инструкция по эксплуатации

Страница: 16 / 46

On the
rEAd
screen, press the , key to access the configuration menu in the
display
mode , i.e., the configuration parameters cannot be modified.
On the
rEAd
screen, press the or keys to access the configuration menu in the
programming mode , i.e., the configuration parameters can be modified.
rEAd ProG CodE
0000
inPt
Figure 8: Access the configuration menu in the programming mode.
Before accessing the configuration menu, it is necessary to enter the access password.
CodE
0000
Figure 9: Access password�
Use the , key to modify the value of the flashing digit
When the desired value is shown on the screen, press the key to skip the digit.
Default password: 0001
Note : The password can be modified, see
“5.6.1.- PASSWORD OF ACCESS”
�
To validate the data, press the key.
If the password entered is incorrect, the
Err
message will appear for a few seconds and the
device will return to the password configuration screen,
Figure 9
.
16
DHC-96 Aac
Instruction Manual