Circutor DHC-96 Aac, Инструкция по эксплуатации

Страница: 13 / 46

4.3.- RELAY OUTPUTS
The device features two programmable relay outputs (terminals 28, 29, 31 and 32, as shown in
Figure 6
) that can be programmed as remote control signals or alarms in the setup menu (
“5.4.-
RELAY OUTPUT 1” and “5.5.- RELAY OUTPUT 2”
).
1 2
70 59 71
1 2
72 58 28 29 31 32 16 15
+ -
B A
RS-485
C
1 2
1 2
I
S1 S2
P1 P2
4 5
Alimentación Auxiliar
Power Supply
Salida de relés
Digital inputs
Relay output
Analog output
Entradas Digitales
Salida Analógica
Figure 6: Relay outputs, digital inputs and Analog output�
4.4.- ANALOG OUTPUT
The device has an analog output (terminals 15 and 16 of
Figure 6
) programmable through the
configuration menu (
“5.3.- ANALOG OUTPUT”
)
4.5.- ENTRADAS DIGITALES
The device has two digital inputs (terminals 70, 71 and 72 of
Figure 6
). The relay outputs can be
activated depending on the value of the digital inputs (See
“5.4.- RELAY OUTPUT 1” and “5.5.-
RELAY OUTPUT 2”
)
4.6.- DISPLAY
The
DHC-96 Aac
features 4 display screens,
Table 6
.
Table 6: Display menu�
Display menu
5.000
Current
13
Instruction Manual
DHC-96 Aac