Circutor DHB-402, Инструкция по эксплуатации

Страница: 34 / 60

4�7�8�2� ANALOGUE OUTPUT: TYPE
(
DHB-424
model)
This screen is used to select the type of analogue output.
The screen flashes between the symbol and the configured value (
Figure 43
).
Figure 43:Analogue output configuration screen: type�
To edit the parameter, press the button.
The following types can be selected:
Voltage 0 ... 10 V. Current 0 ... 20 mA.
Current 4 ... 20 mA.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
Figure 43
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the outputs menu (
Figure 41)
.
Default value : Voltage 0 ... 10 V
4�7�8�3� ANALOGUE OUTPUT: ZERO VALUE ( DHB-424 model)
This screen is used to configure the display value you wish to have at the beginning of the analogue
output ( 0 V , 0 mA or 4 mA , depending on the type of output selected).
The screen flashes between the symbol and the configured value (
Figure 44
).
Figure 44:Analogue output configuration screen: zero value�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
34
DHB-402 DHB-424
Instruction Manual